klemens-s.
User
Hallo zusammen,
ich würde gerne bei meiner Composite ARF Corsair das pneumatische Fahrwerk und die Flächenhydraulik auf einen elektrischen Antrieb umrüsten. Ich habe jetzt in den USA ein Conversion Kit passend für die CARF Corsair gefunden.
Videos electric gear und wing
Link zum Hersteller
Auf Nachfrage habe ich folgende Infos erhalten:
In regards to your servo operated door question yes our integrated sequencer will operate the door servos directly and will operate at the precise time your retracts have completed their cycle.
It is required that you send the gear and wing folding components to us for the conversion.
If you decide to convert the wing mechanism we only need the outboard portion of the mechanisms we do not need the center wing fixed section of the folding mechanism. This part of the mechanism is usually very difficult to remove from the center wing section,as it has been bolted and glued into place.
Carf Corsair mains and tail retract conversion. $600.00
Optional integrated door sequencer. $150.00 Optional if you are going to be utilizing gear doors.
Carf Corsair wing folding conversion. $400.00
Canopy actuator. $200.00 Requires builder fabrication of attachment hardware.
USPS priority shipping to Germany approximately $ 48.00
Conversion time is approximately three weeks from delivery to our facility's.
We recommend you operate the converted system with a 7.4 volt battery system or equivalent
Hat vielleicht schon jemand das Fahrwerk bzw. die Flächenklappmechanik auf einen elektrischen Antrieb umgerüstet oder weiß eine Alternative zu dem oben genannten Kit?
Gruß
Klemens
ich würde gerne bei meiner Composite ARF Corsair das pneumatische Fahrwerk und die Flächenhydraulik auf einen elektrischen Antrieb umrüsten. Ich habe jetzt in den USA ein Conversion Kit passend für die CARF Corsair gefunden.
Videos electric gear und wing
Link zum Hersteller
Auf Nachfrage habe ich folgende Infos erhalten:
In regards to your servo operated door question yes our integrated sequencer will operate the door servos directly and will operate at the precise time your retracts have completed their cycle.
It is required that you send the gear and wing folding components to us for the conversion.
If you decide to convert the wing mechanism we only need the outboard portion of the mechanisms we do not need the center wing fixed section of the folding mechanism. This part of the mechanism is usually very difficult to remove from the center wing section,as it has been bolted and glued into place.
Carf Corsair mains and tail retract conversion. $600.00
Optional integrated door sequencer. $150.00 Optional if you are going to be utilizing gear doors.
Carf Corsair wing folding conversion. $400.00
Canopy actuator. $200.00 Requires builder fabrication of attachment hardware.
USPS priority shipping to Germany approximately $ 48.00
Conversion time is approximately three weeks from delivery to our facility's.
We recommend you operate the converted system with a 7.4 volt battery system or equivalent
Hat vielleicht schon jemand das Fahrwerk bzw. die Flächenklappmechanik auf einen elektrischen Antrieb umgerüstet oder weiß eine Alternative zu dem oben genannten Kit?
Gruß
Klemens