Cool project!
You want to share some more details about it?
best regards, Rudi
No problem.
The foam was cut by a Danish guy many years ago,
and I got it for free 2 month ago by a guy that stopped RC flying
(He is a load master on the RDAF C130J)
1,8 meter span, just under 2000 gram.
All covered with normal Hobbyking covering film, tape and decals also from Hobbyking
Motors:
https://hobbyking.com/en_us/multist...ropellers-cw-ccw-set-of-2.html?___store=en_us
4x 20 Amp esc
I cut 19mm of each prop and run it on 4000 mha 4 cell batt. each motor pulling around 11 amp.
Rudder servo: hxt900,
Nose wheel steering, a standard size servo
Other servos, Turnigy tgy 9018mg
Spektrum DX9 and Ar8000 rx
Regards
Soren