ASW 12 (mit 4-5 m Spannweite): Hersteller?

Hallo,

richtig, der Segler mit dem Wettbewerbskennzeichen IBK.
Es handelt sich um eine ASW12B mit der spitzen Nase (das Original gehörte einst Hans-Werner Grosse).

MfG
Benjamin
 

reinika

User
Ein zeitlos schönes Flugzeug :)
Die 12B von H.W.Grosse hatte laut Simmons 20m Spannweite. Hatten das alle 12B, oder nur seine? Und die einteilige Haube?

Btw. Laut Gerüchten soll eine ASW 12 von ChocoFly kommen, wohl in 1:3.
 

reinika

User
Das sieht sehr professionell aus. Passt wohl kaum in mein Budget :rolleyes:
Sehr umtriebig der Dani.......
Wer hat denn die Auslegung gemacht?

Gruss Reini
 
Auslegung kommt von Philip Kolb.
Wer sonst noch mitentwickelt hat, weiß ich jetzt leider nicht.
 
Hello!

Im Jorge Medina From Tecnoepoxy, the third part of the ASW12 Gps project in cooperation With Philip Kolb and Daniel from Chocofly.
First of all sorry for not writing in German but I can't speak a word of your language, but I usually read this forum as here is stored a lot of valuable information, so with the help of Google translate I manage to understand all of you.

As you can see in our Instagram we are close to finish the moulds and hopefully soon will be in the air

asw12f_2_orig.jpg


asw12f4_1_orig.jpg


We are working on the fuselage and in the wing moulds.
The tail set is complete done and we have molded the first parts as you can see in the next images.
img-20181115-142015_orig.jpg


img-20181115-142026_orig.jpg


img-20181102-122042_orig.jpg


Hope you like it, and stay tunned, soon we will post mode advances
 
ASW12 update

ASW12 update

Our friend Jorge Medina From Tecnoepoxy, slowly but steadily, is almost completing a couple of prototypes. He sent a few photos which I will share here just for the 12 lovers :-)

WhatsApp Image 2019-06-10 at 19.11.47.jpeg

WhatsApp Image b2019-06-10 at 19.11.47.jpeg

WhatsApp Image c2019-06-10 at 17.56.12.jpeg
 

TSF

User
Hallo zusammen,

Wie steht's denn um die ASW12 in 1:4? Wäre eventuell auch an einem "Bausatz" oder nur Rumpf interessiert.

Gruß Thomas
 
Hallo,
habe ebenfalls nach einem Rumpf Ausschau gehalten, weil ich bereits die passenden Tragflächen (Negativformen) habe und die Produktpalette durch dieses seltene Muster eine schöne Erweiterung fände. Wäre also ebenfalls an einem Rumpf bzw. Negativform interessiert...

Gruss
Bertold
 
Massstab 1/4

Massstab 1/4

Hallo,
die Sache aus Post 16 hat sich leider zerschlagen, weil ich es habe schlüren lassen (wie man in Westfalen sagt).
Jemand anderes bekommt das Urmodell. Die Frage nach einem Rumpf im Maßstab zwischen 1/4 un 1/3,75 ist damit wieder offen.
Der Flieger von Chocofly ist jenseits meiner Möglichkeit en.
Stefan
 
Ansicht hell / dunkel umschalten
Oben Unten