Techmaster
User
Hier habe ich was gefunden,
Zitat :
"Flew mine yesterday. Took a crap load of right aileron trim to fly level. All I had actually and it still really wasn't enough. I also had it just nosing down a little when on the CG machine right at the recommended spot. Well it felt very tail heavy there so don't be afraid to push that weight forward. I'll correct that before trying to fly again, but I'm not happy about this trim issue.
Mar 12, 2019, 09:05 PM
#677
easton24
Registered User
I had the same on my plane. Had to give it some right aileron trim and seemed to fly a little tail heavy even though it cg a little nose heavy. I ended up adding weight to the nose. Now that it is trimmed out it flies great.
-"Flog meine gestern. Hat eine Mistladung der rechten Querrudertrimmung genommen, um eben zu fliegen. Alles was ich eigentlich hatte und es war immer noch nicht genug. Ich hatte es auch nur ein wenig runtergerissen, als ich auf der CG-Maschine genau an der empfohlenen Stelle war. Nun, es fühlte sich dort sehr schwanzlastig an, also hab keine Angst, dieses Gewicht nach vorne zu schieben. Ich werde das korrigieren, bevor ich erneut versuche zu fliegen, aber ich bin nicht glücklich über dieses Trimmproblem.
12. März 2019, 21:05 Uhr
# 677
easton24
Ich hatte das gleiche in meinem Flugzeug. Musste ihm eine richtige Querrudertrimmung geben und schien ein wenig schwanzlastig zu fliegen, obwohl es ein wenig nasenlastig war. Am Ende fügte ich der Nase Gewicht hinzu. Jetzt, wo es ausgeschnitten ist, fliegt es großartig.
https://www.rcgroups.com/forums/sho...D-20cc-Arf-NEW-release-Built-and-flown/page46
Zitat :
"Flew mine yesterday. Took a crap load of right aileron trim to fly level. All I had actually and it still really wasn't enough. I also had it just nosing down a little when on the CG machine right at the recommended spot. Well it felt very tail heavy there so don't be afraid to push that weight forward. I'll correct that before trying to fly again, but I'm not happy about this trim issue.
Mar 12, 2019, 09:05 PM
#677
easton24
Registered User
I had the same on my plane. Had to give it some right aileron trim and seemed to fly a little tail heavy even though it cg a little nose heavy. I ended up adding weight to the nose. Now that it is trimmed out it flies great.
-"Flog meine gestern. Hat eine Mistladung der rechten Querrudertrimmung genommen, um eben zu fliegen. Alles was ich eigentlich hatte und es war immer noch nicht genug. Ich hatte es auch nur ein wenig runtergerissen, als ich auf der CG-Maschine genau an der empfohlenen Stelle war. Nun, es fühlte sich dort sehr schwanzlastig an, also hab keine Angst, dieses Gewicht nach vorne zu schieben. Ich werde das korrigieren, bevor ich erneut versuche zu fliegen, aber ich bin nicht glücklich über dieses Trimmproblem.
12. März 2019, 21:05 Uhr
# 677
easton24
Ich hatte das gleiche in meinem Flugzeug. Musste ihm eine richtige Querrudertrimmung geben und schien ein wenig schwanzlastig zu fliegen, obwohl es ein wenig nasenlastig war. Am Ende fügte ich der Nase Gewicht hinzu. Jetzt, wo es ausgeschnitten ist, fliegt es großartig.
https://www.rcgroups.com/forums/sho...D-20cc-Arf-NEW-release-Built-and-flown/page46