ex2
ex2
Hallo,
ich stelle jetzt einfach mal meine Bemaßung hier rein:
l=0, t=250mm MH32-10%
l=850mm, t=240mm, Rücksprung Nase: 3mm, Mh32
(bestehender Mittelflügel, Trapez)
neu: elliptischer Außenflügel
l=850mm, t=240mm, Rücksprung 3mm, MH32
l=1430mm, t=209mm, Rücksprung 11mm, MH32
l=2110mm, t=117mm, Rücksprung 50mm, ???
l=2210mm, t=90mm, Rücksprung 75mm, ???
l=2260mm, t=70mm, Rücksprung 95mm, ???
l=2310mm, t=~30mm, Rücksprung ~140mm, ???
(bis jetzt geplante Profilierung: siehe S.1)
Der neue Außenflügel soll natürlich auch am "high-ex2" eingesetzt werden, das gäbe dann ca. 6,10m Spannweite, evtl. am intension2 mit dann ca. 3m Spannweite. Haupteinsatzzweck bliebe aber der ex2 (4,62m Spannweite).
Die Weite meiner Spannung nimmt allmählich auch ganz schöne Ausmaße an!
Gruß
Wilhelm.
ex2
Hallo,
ich stelle jetzt einfach mal meine Bemaßung hier rein:
l=0, t=250mm MH32-10%
l=850mm, t=240mm, Rücksprung Nase: 3mm, Mh32
(bestehender Mittelflügel, Trapez)
neu: elliptischer Außenflügel
l=850mm, t=240mm, Rücksprung 3mm, MH32
l=1430mm, t=209mm, Rücksprung 11mm, MH32
l=2110mm, t=117mm, Rücksprung 50mm, ???
l=2210mm, t=90mm, Rücksprung 75mm, ???
l=2260mm, t=70mm, Rücksprung 95mm, ???
l=2310mm, t=~30mm, Rücksprung ~140mm, ???
(bis jetzt geplante Profilierung: siehe S.1)
Der neue Außenflügel soll natürlich auch am "high-ex2" eingesetzt werden, das gäbe dann ca. 6,10m Spannweite, evtl. am intension2 mit dann ca. 3m Spannweite. Haupteinsatzzweck bliebe aber der ex2 (4,62m Spannweite).
Die Weite meiner Spannung nimmt allmählich auch ganz schöne Ausmaße an!
Gruß
Wilhelm.