Du verwendest einen veralteten Browser. Es ist möglich, dass diese oder andere Websites nicht korrekt angezeigt werden. Du solltest ein Upgrade durchführen oder einen alternativen Browser verwenden.
Could someone that have an Alpina 5001 tell me the distance between the trailing egde of the stab and the bottom of the rudder, with an EWD of 1,5 degrees? Please look at the attached picture.
Hello Kingfisher,
depending on the exact position of the CG the distance you ask might be different.
Try to follow the setting for the CG and set the elevator accordingly to the middle position marked in the rudders fin.- I made the same with my Alpina 4001.
If all flaps are in the middle position, you will have no issue for the maiden flight.
CG is 85-95 mm from the wings nose. So one reason for the missing info is that broad variation and of course little manufacturing tolerancens.
Here the link to the german manual..I may ask Tangent for infos. http://tangent-modelltechnik.de/de/img/pdf/bauanleitung_alpina5001_pro_elektro.pdf
Good luck and send some pictures after your flight or during it...