Sorry for the English - I can only read German not write it....
Warning !! Light update for the Schulze ILS8-936g charger
Don’t update your ILS8-936 charger with the light update (cost 140 EUR.)
The construction that Schulze use to makes the high voltage for the backlight is that bad, that you in addition to the light get a sound generator.
In my charger is the sound that loud::
• that I can’t use the charger in my workshop, when I am there, anymore.
• that I can’t use the charger in my car when I am driving
• that I now have a nearly 1000 EUR charger (charger price + SW update + light update) – the so-called “high end charger” that everybody in our club are laughing at
You can hear the sound on the video in this link
http://www.rcgroups.com/gallery/showphoto.php?photo=17921&sort=1&cat=500&page=1
The sound is not that good an the video, but you can easily hear the annoying sound.
Of cause I have contacted Matthias Schulze, after 2 weeks waiting, he had send me this answer:
The humming sound, which delivers your isl 8 after the mounting of the background illumination, is totally normal.
It shows you that the voltage transformer for the illumination works.
It is almost no longer perceptible already in slight distance to the device.
If nevertheless it should disturb you, you can help yourself by cutting a wire inside the charger. Cut the red (12 V) lead only, that leads to the glued component. Never cut the green GND lead or the white 100 Volt lead!
Best regards
Matthias Schulze
Schulze Elektronik GmbH
Prenzlauer Weg 6
64331 Weiterstadt
Germany
It’s fascinating that hi suggest me is to cut the wire to the light generator – this suggestion put the light out of work!! That’s what I have got for my 140 EUR – NOTHING !
A good advice: don’t update your charger!!
Best regards
Soren
-----------------------
steht nun bei den Ladegeräten.
HWE
[ 17. Mai 2005, 17:21: Beitrag editiert von: Heinz-Werner Eickhoff ]
Warning !! Light update for the Schulze ILS8-936g charger
Don’t update your ILS8-936 charger with the light update (cost 140 EUR.)
The construction that Schulze use to makes the high voltage for the backlight is that bad, that you in addition to the light get a sound generator.
In my charger is the sound that loud::
• that I can’t use the charger in my workshop, when I am there, anymore.
• that I can’t use the charger in my car when I am driving
• that I now have a nearly 1000 EUR charger (charger price + SW update + light update) – the so-called “high end charger” that everybody in our club are laughing at
You can hear the sound on the video in this link
http://www.rcgroups.com/gallery/showphoto.php?photo=17921&sort=1&cat=500&page=1
The sound is not that good an the video, but you can easily hear the annoying sound.
Of cause I have contacted Matthias Schulze, after 2 weeks waiting, he had send me this answer:
The humming sound, which delivers your isl 8 after the mounting of the background illumination, is totally normal.
It shows you that the voltage transformer for the illumination works.
It is almost no longer perceptible already in slight distance to the device.
If nevertheless it should disturb you, you can help yourself by cutting a wire inside the charger. Cut the red (12 V) lead only, that leads to the glued component. Never cut the green GND lead or the white 100 Volt lead!
Best regards
Matthias Schulze
Schulze Elektronik GmbH
Prenzlauer Weg 6
64331 Weiterstadt
Germany
It’s fascinating that hi suggest me is to cut the wire to the light generator – this suggestion put the light out of work!! That’s what I have got for my 140 EUR – NOTHING !
A good advice: don’t update your charger!!
Best regards
Soren
-----------------------
steht nun bei den Ladegeräten.
HWE
[ 17. Mai 2005, 17:21: Beitrag editiert von: Heinz-Werner Eickhoff ]