Wenn eine Zelle stirbt zieht sie auch ihren Partner mit runter (oder den Paralellstrang), Sicherheitsgewinn ohne Akkuweiche sehe ich da nicht.
Hi Paul
das glaube/hoffe ich eben nicht.
Sony schreibt:
"For example, cylindrical batteries are incorporated such safety mechanisms as circuit-breaker devices, safety vents, and PTC devices. The maximum charging voltage of the dedicated recharger for these batteries is set to 4.2 V, but should the recharger malfunction and the maximum setting become invalid, the Li2CO3 added to the cathode would dissociate from around 5 V, and the gas generated as a result would cause an increase in the internal battery pressure. This change in pressure would cause the safety vent to be deformed, removing the cathode lead and cutting off the charging current, thereby ensuring safety. In addition, should the battery be exposed to a fire or some other extreme temperature condition causing a sudden increase in internal pressure, the safety vent would split, averting possible danger.
Moreover, should erroneous use result in the flow of large currents and battery charging and discharging, the PTC device will act to reduce the current."
Quelle:
http://www.sony.com.cn/products/ed/battery/download.pdf S. 39
Das spricht für mich dafür, dass die Zelle im Fehlerfall unterbricht und damit die 2. "P"-Zelle übernimmt. Natürlich dann mit reduzierter Kapazität, was man ja aber dann an der Senderakkuspannung merken kann.
Je länger je mehr frage ich mich, wieso Futaba beim "Original"-LiIo-Akku mit ähnlichen Zellen diese Elektronik eingebaut hat - balancen und bei Überspannung abschalten ok, aber bei Unterspannung den Akku anstatt das Modell zu schützen ist doch unlogisch.
Jedenfalls habe ich mich nun für Sony US 18650 mit 2,1Ah entschieden, werde also dann 4,2Ah Kapazität im Sender haben. Balanceranschluss werde ich zur Überwachung mit einbauen.
Beste Grüsse
Raphael