DYS-3A Manual Instruction
1.Functions&Features
● Volts scope:volts VCC:2.9V-4.2V(1 cell lipo battery)
● Working current: Continues 2.5A, Burst 3.5A,3A working up to 30secs.
● Changing motor turns can realize reverse and converse
● Adopt advanced startup,appease different poles of motor application.
● Secure galvanization. Once galvanization, Startup Not grated if the rocker is not in the threshold position, when the rocker is put in the threshold position, there will be a long beep indicating startup is available.
● Lost remote controlled signal protection
Motor drive immediately cut off when the signal transmitted between emitter and receiver is bad or instable; alert beep goes and strikes once 2 seconds. Normal run continuous when the signal gets recovered.
● Voltage protection
If the voltage lower than 2.9V or up to 4.4V once galvanized, the startup will not be granted. The function will be available when startup.
● High-current protection
Cool down through limiting power when the temperature reaches the set limit 95℃, if the cooling failed, the main power supply will be cut off immediately Now, you have to wait the temperature dropping back to normal and galvanize again to resume normal service.
● Lipo battery protection
If lipo volts lower than 3.0V once galvanized,it will cut off the motor power slowly, Normal run continuous when lipo battery power recovered.
● Halted run protection
If wheel is locked, the max power output is limited at 30%.