Du verwendest einen veralteten Browser. Es ist möglich, dass diese oder andere Websites nicht korrekt angezeigt werden. Du solltest ein Upgrade durchführen oder einen alternativen Browser verwenden.
Produktbeschreibung DIPON® Effect Pigments DIPON® Effektpigmente bestehen aus drei Pigmentklassen: Absorptionspigmente, Perlglanzpigmente sowie Metalleffektp...
kandydip.de
Your tail mount is great, too!
Are you sure the noise is because of the servo placement? On the first one you used simple wire pushrods, now you have those double clip things ...
IDS Typ MKS 6100 - IDS System für MKS DS 6100 Glider, HV 6100, DS 450, DS 470 und DS 480 Servos. Im nächsten Schritt wähle deine gewünschte Schubstange aus. Wir bieten für IDS Typ MKS 6100 vier versch
If the servos are installed before closing the mold, there is no need for access holes. But then you have to wait for the two halves to cure first.
The MKS DS6100 is 10mm tall, I don't think it would fit in your 80% Wipe anyways.
But your DIY IDS looks very professional! You give up on the bearing in the frame, but I don't think that matters much.
you are right on the wipe it has little importance it has strong servos and light ailerons
I generally use servos with bearing.
Starting from a uniball and turned to bearing diameter, minimal and light the photo speaks
Der nächste Druck läuft auch schon.
2 Tage 12h und 1kg, für den inneren Teil der Außenflügel (einen der beiden)
3 Umrandungen mit 0.5mm, 0.3mm Schichten, 10% Gyroid Infill
Nasses Bandschleifpapier geht ganz gut um Verzug im Druck vom Abkühlen zu entfernen.
Die einzelnen Teile hab ich mit Sekundenkleber zusammengeklebt.
Dann mit Epoxy auf 8mm Furnierplatte Buche. Hier ist auch schon Primer drauf.
Den hab ich dann mit einem Tellerschleifer und Akkuschrauber runtergeschliffen.
An dem linken Stück hatte ich schon probiert die Rillen mit Sekundenkleber zu füllen und schleifen.
Geht auch, aber teurer, langsamer und mehr Arbeit.
Bin noch am Überlegen, ob es nötig ist, über die geschliffene Oberfläche noch 2k Lack zu machen.
Der Primer ist eigentlich hart genug und Polieren geht bestimmt auch,
Moin Marc,
schaut gut aus. Tipp: Schneid alles Gewebe, was nicht fixiert ist nachm tränken mit ner Schablone zu auf ner Folie. Dann verzieht es sich nicht so schnell mehr. Schablonen kann man am simpelsten aus Pappe oder Depron machen.
Grüße
Lukas